PTFE Mesh Belts Black

PTFE Mesh Belts Black

  • PTFE Mesh Belts Black
Place of Origin: china

Product Description

PTFE Mesh Belts is suited for conveying products within highly efficient air distribution systems allowing optimised moisture removal to take place and is commonly used within ultra violet and infra red dryer units. The open area allows maximun air flow optimising drying times whilst its extreme properties make it a natural choice for dryer manufactures.

Applications:PTFE mesh belts are used in applications such as the drying of printed products for example:point of display stands,T-shirts,glass and mass produced paper prints. Print dryers usually opt for Ultra violet,infra red or hot air as the heat source to dry. Other applications range from the drying of cereals,non woven`s charcoal interlings,carpet & carpet tiles,printed circuit boards and shrink-wrap tunnels but to name a few.

Features and Benefits
PTFE open mesh conveyor belt is light weight and cost effective therefore is easy to handle and less expensive than wire alternatives that can be difficult to replace. Often supplied with a metallic clipper type fastener these style of belts can easily be removed and replaced therefore minimising downtime and saving money. This material can be offered in carbon loaded black therefore providing antistatic properties.

Main Properties:
1) Chemical inertness
2) Temperature resistant from -60C~+260C
3) Ultraviolet,infra-red,microwave,radio frequency resistance
4) Non-Stick surface
5) Food Approved(USFDA)
6) Lightweight and energy efficiency for economical operation

PTFE Mesh Conveyor Belt:
Style Number FGG-5090 FGG-5110 FGG-5110*2 FNX-5130 FKG-5150
Woven Substrate Warp Fiberglass Fiberglass Fiberglass Nomex Kevlar
Fill Fiberglass Fiberglass Fiberglass Nomex Fiberglass
Weight[kg/m 2] 41010 47015 58020 52020 153020
Thickness Mil 37 43 45 51 60
MM 0.950.05 1.100.05 1.150.05 1.300.05 1.50.05
Tensile strength [kg/cm] 28.91.5 31.01.5 31.01.5 28.11.5 82.31.5
Elongation Tension Area <1.1% <1.1% <1.1% <1.1% <0.5%

PTFE Seamless Conveyor Belt:
Standard thickness fabric 14.0-16.00/mil 0.35-0.40(mm)
Width most 60/in 1500(mm)
Seamless belt Girth (mm)
1360 1380 1440 1470 1510 1520 1530 1540 1550 1560
1580 1600 1640 1660 1680 1730 1740 1780 1820 1830
1840 1850 1870 1880 1950 2000 2040 2100 2230 2240
2250 2310 2320 2420 2440 2450 2500 2600 2630 2750
2800 2820 2850 2880 2900 3050 3080 3090 3200 3450
3540 3590 3820 3850 3890 3900 3920 3930 4200 4270
5100 5270 5400 5640 5800 6000 6440 6700
Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-3000 characters
Post Sourcing Request >>